Daily Sanitizing and Cleaning of the Apex exosuit

  • With the device hanging on a hanger, spray it well at the end of each day with a sanitizing solution such as Tide Antibacterial Fabric Spray or Woolite Advanced Stain & Odor Remover + Sanitize.

 

 

  • Ensure there is adequate airflow around the device, and allow it to dry
    thoroughly before the next use.

Periodic Sanitizing and Cleaning of the Apex exosuit

Cleaning Option 1 (Partial Machine Wash):

Note: DO NOT machine wash the Back component of the Apex exosuit. Please read and follow these instructions carefully.

  • Ensure the Apex is in disengaged mode.
  • Remove the Switch from the Left Shoulder Strap.
  • Remove the Shoulder Straps from the Back, disconnect the Thigh Sleeves from the Bands, and remove the Bands from the Back.
  • Place the Shoulder Straps and Thigh Sleeves inside a laundry sack and machine wash using a mild detergent in cold or warm water (do not use hot water) using the most gentle cycle possible.
  • The Back and Bands can be hand washed with a moist, soapy rag (mild detergent and cold or warm water).
  • The Switch, Clutch, cable, clips, ladder locks, and buckles can be wiped clean with a moist, soapy rag, or disinfectant wipe such as Clorox Disinfecting Wipes or Lysol Disinfecting Wipes; be careful not to get these components wet or submerge them. (See Daily Sanitizing section for cleaning option URLs.)
  • Line dry wet components thoroughly.

 

Cleaning Option 2 (Complete Hand Wash):

  • Ensure the Apex is in disengaged mode.
  • Remove the Switch from the Left Shoulder Strap.
  • Remove the Shoulder Straps from the Back, disconnect the Thigh Sleeves from the Bands, and remove the Bands from the Back.
  • Hand wash all components with a moist, soapy rag (mild detergent and cold or warm water).
  • The Switch, Clutch, cable, clips, ladder locks, and buckles can be wiped clean with a moist, soapy rag, or disinfectant wipe such as Clorox Disinfecting Wipes or Lysol Disinfecting Wipes; be careful not to get these components wet or submerge them.
  • Line dry wet components thoroughly.

Make Work Stronger and Safer

See how we can equip your team with the strength they need and the safety they deserve.

Scroll to Top